Genuino UNO Rev3
The Genuino UNO Rev3 is a microcontroller board based on the ATmega328. It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable (not included) or power it with a AC-to-DC adapter or battery to get started. The UNO differs from all preceding boards because it does not use the FTDI USB-to-serial driver chip.
Genuino UNO comes from the Arduino.cc family, and is the same board as the Arduino UNO but under a different brand due to trademark issues which you can read about here: https://www.arduino.cc/en/Main/GenuinoBrand or on an article in Make Magazine.
The Genuino UNO has:
- ATmega328P microcontroller
- Digital I/O Pins 14 (of which 6 provide PWM output)
- PWM Digital I/O Pins 6
- Analog Input Pins 6
- Flash Memory 32 KB (ATmega328P) of which 0.5 KB used by bootloader
- SRAM 2 KB (ATmega328P)
- EEPROM 1 KB (ATmega328P)
- Clock Speed 16 MHz